Metered
Uniform Flow
Continuous pushing action in one direction provides uniform discharge
without pulsation. Displacement for each revolution of the rotor is affected
slightly by changes in discharge pressure.
Low Internal
Velocities
All fluids, including highly volatile as well as viscous materials,
are handled with minimum turbulence, agitation or pulsation.
Handles Solids
in Suspension
The unit will pump solids or abrasives suspended in liquids. Even mixtures
containing high percentages of solids are handled satisfactorily.
Self-Priming
Pumping action starts the instant the pump starts. The
Pump is built to self-prime at 28 feet of suction lift.
Positive Displacements
The single rotating part exerts a positive pumping action comparable
to that of a piston moving through a cylinder of infinite length. Head developed
is independent of speed; capacity is approximately proportional to speed. Slippage
is a function of viscosity and pressure and is thus predictable for all operating
conditions.
Passes Particles
Particles up to 1 1/8 inches in diameter can be handled by the larger
Pumps without difficulty. Should a sharp particle become imbedded in the stator,
it is passed over and the following fluid tends to flush it free.
|
Reversible
The unit will pump in either direction with equal efficiency
merely by changing direction of rotation. (This applies to all
frames except a few of the larger models.)
Cook & Beals, Inc. builds the base
for the Pump and equips it with a Variable Speed Pulley on motor,
pump pulley, belt, adjustable motor base, and a forward/reverse
switch.
This arrangement allows the operator to
change the speed of the pump to meet the needs of the large or
small extracting capacities.
The inlet at the top of the pump can be
rotated either right or left for installing.
Price $2,525.00
with I HP motor 5/8" shaft, 110-220 volt FOB
Loup City Un-crated
Crating $100.00
|
